kingdom_concrete_drilling_sawing

Thu, 06 Feb 2020 17:34:09 GMT

Avoid Concrete Cutting Mishaps
by Hiring a Toronto Professional

Cutting concrete is a difficult and dangerous task that often requires an expert hand. Before cutting through your own wall to create that extra doorway, consider the demands of your current project. Is it something you can execute yourself? If industrial grade cutting is required, chances are an amateur hand just won’t “cut” it. Hiring a speciality contractor for concrete cutting in Toronto will save you time, money and energy—not to mention costly mistakes.

Common DIY mistakes

Many amateur cutters don’t realize that concrete surfaces are set with rebar or other steel forms. Cutting through these reinforcing structures can permanently damage the saw blade or drill and cause dangerous sparks. Similarly, never assume that concrete will be free of electrical wires, cables or plumbing pipes. In addition to damaging equipment, you risk compromising surrounding infrastructure.

Furthermore, amateur cutters don’t have an intuitive understanding of concrete consistencies. For example, driveways and garage floors are usually very dense, whereas walkways around patios are less solid because they don’t hold up as much weight. Using a drill or blade meant for soft concrete on denser surfaces will damage tools and cause excess dust.

Lastly, amateur cutters aren’t always well informed when it comes to proper safety measures. Flying debris and piercing noise from hammers and saws are common hazards on construction sites. Additionally, containment of silica dust is critical. Often referred to as quartz, silica is a mineral commonly found in concrete, masonry rock, granite and other landscaping materials. Dust containing silica particles can cause lung cancer and disease—it only takes a small amount!

Trust a professional

When you hire a professional for concrete cutting in Toronto , quality, efficiency and the highest standard of safety are guaranteed. Not yet convinced? Consider these four reasons for trusting a concrete specialist:

Precision cuts. Ensure smooth, even lines with the experienced hand of a concrete specialist. They have the knowledge and skill to know which drills to use and at which speed to cut for a precise finish.
Access to top-of-the-line equipment. Equipment is key for an efficient job and those hard-to-reach cuts. Second-grade rentals prolong the task at hand and require a lot more effort to cut through concrete slabs.
Guaranteed safety. Handling loose pieces of concrete can be dangerous, especially if rusty pieces of metal are protruding. A specialist will dispose of concrete for you using hoists, bobcats, excavators and other heavy-duty equipment not readily available to consumers.
Quick workmanship. Thanks to years of experience and top rated equipment, a concrete specialist can find practical solutions to unique cutting problems and get the job done in record time.

With more than 23 years of experience working with concrete in Toronto, Hamilton and Southern Ontario, Kingdom Concrete Drilling & Sawing Inc. provides innovative and cost-effective solutions for all of your concrete cutting needs. Comprised of a certified team of excavators capable of handling jobs of all scopes and sizes, from smaller residential jobs to complex commercial projects, Kingdom Concrete can get the job done right.

Avoid having to re-do a project that was done incorrectly— contact Kingdom Concrete for a free estimate today!

Thu, 06 Feb 2020 17:29:07 GMT

Ground Penetrating Radar for Concrete Scanning Projects in Toronto & the GTA

Being able to see into sub-surfaces is a must for anyone who is about to saw or drill into concrete. Becoming informed of the concrete’s thickness is also very useful under most circumstances. To easily accomplish both of these objectives, Kingdom Concrete Drilling & Sawing Inc. can complete any concrete scanning project with services for ground penetrating radar in Toronto . For over a decade, Kingdom concrete has provided this technology as part of our suite of services.

How It Works

Ground penetrating radar (GPR) utilizes high frequency radio waves in conjunction with electromagnetic energy to image concrete and other surfaces. Radar pulses are sent into surfaces to be scanned, and depending on how they get bounced back, an image is relayed that reveals what objects are underneath. Changes in material can also be detected, and any voids and cracks will be distinguished during the concrete scanning process.

A Safe Imaging System

Many of our clients who are unfamiliar with GPR technology are concerned about safety. We’re always happy to report that ground penetrating radar is not a source of hazardous radiation. It’s completely safe, and emits approximately one per cent of the power of a cellular signal. In other words, you face more risk from using common wireless devices than you do with GPR. Evacuation is never needed when concrete scanning is performed utilizing GPR technology. Hospitals, airports, and other high traffic institutions can all use GPR during any regular day.

Equipment Components

Technology for ground penetrating radar in Toronto is relatively compact. In most cases, it can easily be handled by a single person and will fit in the trunk of a car. It consists of several components, including:

An encoder —usually a wheel—that measures distance over the area to be scanned. At predetermined points it activates the radar signal.
The A/D converter that interprets and translates signals from analogue to digital. It’s the connective component between the antenna, the control unit, and the encoder.
A monitor/ PC, which allows images to be relayed in real-time and/or stored and processed later, depending on the exact device used.
The control unit , which is the central intelligence behind GPR technology. It directs all subordinate components.
The antennas , which transmit radar signals and receive reflected waves.

Ground Penetrating Radar Applications

Toronto structures can have a number of components embedded under their concrete surfaces. GPR scanning can help locate rebar, conduits, cables and pipes, to name a few. Concrete that’s cut without prior scanning could result in costly damages to necessary infrastructure or even injury. Therefore, the majority of concrete cutting, drilling, and sawing projects are often best tackled in conjunction with GPR.

Free Estimates 24/7

Contact Kingdom Concrete Drilling & Sawing Inc . today for a free estimate on any of our services including GPR , core drilling and concrete cutting .

Thu, 06 Feb 2020 17:22:04 GMT

Your Step-by-Step Guide for
Concrete Removal in Toronto

You might think that hiring a contractor to demolish a 12 x 14-ft patio is unnecessary and expensive, so you decide to take on the task yourself. After all, it’s brainless work, right? Wrong! There’s more to concrete removal than just swinging a sledgehammer. Careful planning, the right tools, protective gear and a little bit of know-how are essential to the project at hand, especially if you’re looking to save on effort and time. Follow these nine easy steps for a quick, efficient and safe concrete removal in Toronto:

Get informed. Before you start hammering away, check with the appropriate professional to make sure there are no wires or cables running beneath the concrete you wish to remove.
Gear up. This is one project where “safety first” really matters. Make sure you have the required protective gear (noise cancelling earmuffs, safety glasses, construction gloves, steel toe boots, etc.) before you start.
Choose the right tools. There are a number of handy tools you could use for concrete removal, such as sledgehammers, jackhammers, crowbars and mattocks. The choice will depend on the nature of the task at hand. Effective on large, extra thick slabs, jackhammers are usually overkill for most home concrete breakup projects. Give the sledgehammer a go before moving on to heavier equipment.
Prep the area. Flying chunks of concrete can damage your property, so make sure to protect your windows, siding, patio and sidewalk with a durable sheet of plastic (available at home hardware stores). The sheeting will not only catch shrapnel but most of the dust as well for a quick and efficient cleanup.
Break up the concrete. The only way you’ll manage to remove concrete is to break it up into smaller pieces first by using a jack or sledgehammer. Start in a corner and manoeuvre in grid formation (left to right).
Cut reinforcements. Many concrete surfaces are set with reinforcing steel known as rebar. To separate chunks of concrete, saw through steel wires with an angle grinder. You can also use bolt cutters on thinner cables.
Pry concrete loose. Even after concrete is broken, some chunks may remain lodged. Swing the pointed end of a mattock into the newly formed cracks and pry up.
Remove concrete. After you’ve loosened locked-together pieces of concrete, all that’s left is to remove them. Get yourself a wheelbarrow (preferably a heavy-duty hauler) to move chunks of concrete and steel cut-offs away from the demolition site—don’t forget to wear your protective gloves! Avoid overloading the wheelbarrow to spare yourself the back pain or call in a favour with a close friend to help with the heavy lifting. You can also look into renting a trash container with a gate for easy clearance.
Call in an expert. Handling loose pieces of concrete is backbreaking work. Call in your local specialist for concrete removal in Toronto. They’ll take heavy slabs to regulated drop-off sites or concrete recycling depots to spare you the hassle.

While tearing up concrete yourself can save you money on labour costs, it can be a dangerous and time-consuming task if not executed correctly. Rather than spend hours upon hours removing concrete and debris, entrust your project (big or small) to Kingdom Concrete Drilling & Sawing Inc ., Toronto’s reliable concrete cutting and removal specialist. Call for a free estimate today !

Thu, 06 Feb 2020 17:19:06 GMT

What is Concrete Core Drilling and How Does It Work?

Concrete core drilling involves cutting a cylindrical section of concrete from a larger structure. Because concrete is such a hard material, concrete coring is carried out using a diamond core drill. At Kingdom Concrete Drilling & Sawing Inc. , we provide concrete coring and drilling in Toronto and Hamilton for a variety of different applications. Here's an overview of how the process works.

How Concrete Core Drilling Works

A diamond cutting drill is an indispensable tool for concrete coring in Toronto. The diamond drill bits used in these drills are attached to the end of a steel tube. In many cases, the drill rig itself is stabilized in some way to the floor or to a surface using a vacuum seal, a bolt, or an anchor. This allows for precision and control during the coring process.

Much like a hole saw, the core drill removes a perfectly cylindrical concrete core from the surface that needs to be cut. The concrete cylinder that remains in the drill bit is called the "core." Once the core is removed, the process is complete. In order to reduce friction and prevent overheating during the drilling process, the drill bits are cooled down by water.

Concrete Coring Applications

Concrete core drilling has numerous applications for many different industries. It can be used to create a hole in a concrete floor, ceiling, or wall whenever there is a need to do so, as well as to create manholes.

Most commonly, concrete coring and drilling in Toronto are used for utility penetration. This is important across a range of different fields, such as electrical, plumbing, drainage, and HVAC. Core drilling is also used to create pathways for phone and computer lines, as well as for structural testing.

Concrete Coring Advantages

There are a number of advantages to choosing concrete drilling in Toronto for the above applications. One of the most important is that concrete core drilling can be used to create holes that are anywhere from 1/2" to 36" in diameter. These holes can be drilled to any depth and at any angle, both vertically and horizontally.

The process of cutting a concrete core with a diamond core drill does not create significant dust or noise and is therefore minimally disruptive. Concrete core drilling methods are also well-suited to confined spaces, remote spaces, and sensitive locations. Concrete coring is an ideal choice for projects of all sizes and scopes.

Professional Concrete Coring and Drilling Services in Toronto

For concrete coring and drilling in the Toronto and Hamilton areas, look no further than Kingdom Concrete Drilling & Sawing Inc. With over 23 years of experience and clients in numerous industries, from home building to plumbing, you know you can rely on our experts to get the job done right. We always strive to provide our clients with cost-effective and timely solutions that will meet all of their needs.

To find out more about how our concrete core drilling services can help your project succeed, just contact Kingdom Concrete Drilling & Sawing Inc.

Thu, 06 Feb 2020 17:14:30 GMT

The Most Common Blades for Concrete Cutting

Cutting concre te is a complex job that requires specialized tools and saw blades. There are many variables that must be taken into account when selecting the right one for the job. Here’s what you should know about the most common types of blades used for cutting concrete.

Corundum Masonry Blades

Corundum is a very hard form of aluminum oxide used as an abrasive for cutting tough materials, grinding optical glass and polishing metals. These blades are inexpensive, widely available and only create minimal amounts of dust when cutting.

However, the material wears down quickly and gets hot enough to visibly glow, so you have to take breaks every 30 seconds when using a corundum masonry blade to cut concrete. These are best for small, shallow cuts, or projects with limited budgets.

Diamond Blades

Diamond blades are commonly composed of a mixture of synthetic diamond fragments and a bond, usually made of metal powders, that holds the diamonds together. Because diamond is the hardest natural substance on earth, these blades are used for cutting everything from concrete and stone to semiconductor materials, diamonds and other gemstones. They can be used wet or dry.

• Dry cutting diamond blades. These blades are better for longer, deeper cuts than a regular masonry blade. The serrated or toothed edge helps to keep the blade cool. Dry cutting blades are used when there are electrical currents nearby or work sites that must be kept dry. However, they tend to create more dust than the alternatives when cutting concrete.

• Wet cutting diamond blades. These blades produce the cleanest, smoothest cuts in the shortest amount of time. They can have serrated or smooth edges and are used with saws that provide a continual spray of water to keep the blade cool and trap dust produced by the sawing process. While they’re a lot more durable than corundum or dry cutting blades, they’re also more expensive and require a special saw. Wet cutting diamond blades are often used by professional cement cutters, as they’re the best for big jobs that require a lot of cutting.

Professional Concrete Cutting and Sawing in Toronto

Unless you have the right equipment and a lot of experience, cutting concrete is best left to professionals. A contractor that specializes in concrete cutting and sawing will make sure the job gets done properly and quickly. Kingdom Concrete Drilling & Sawing Inc. has over 20 years of experience working with concrete in the Greater Toronto Area. We can handle anything from small residential jobs to large scale commercial projects. Call us today to find out more about our services.